Akai MPC 500 Sounds
AKAI MPC 500 SOUNDS
AKAI MPC 500 LOADING INSTRUCTIONS
Dirty South Sounds
East Coast Sounds
West Coast Sounds
Midwest Sounds
Reggaeton Sounds
Latin Sounds
Neo Soul Sounds
R&B Sounds
UK Hip Hop Sounds
Hip Hop Instruments
Hip Hop Drum Kits
Motif Classic Drum Kits
Free Akai MPC 500 Samples!
Akai MPC 500 Specifications
- General
- Display: 2 x 16 character LCD w/back light
- Memory card slot:Compact Flash (The size of the compact flash card that MPC500 can handle is from32MB to 2GB)
- Dimensions: 266mm x 175mm x 44mm
- Weight: 1.34 kg
- Power requirement: 12v DC 600mA (negative tip)
- Battery life: Approximately 4.5 hours of continuous use with LCD backlight ON.Sound Generator
- Sampling rate: 44.1kHz
- Memory capacity: 16MB standard (11.5MB for sound memory), expandable to 128MB
- Recording time: 136sec. (16MB, MONO) or 24m28sec. (128MB, MONO)
- Memory expansion slot: 1 x for optional EXM128
- Data format: 16-bit linear
- Polyphony: up to 32 (dependent on processing)
- Dynamic filtering: 2-pole lowpass filter per voice
- Preset sound memory: 5MB
- Number of programs: 24Effects
- Effects: 2 stereo effects and Master effect
- Effect type: Chorus, Flanger, Bit grunger, 4 band EQ, Compressor, Phase shifter, Tremolo,
- Flying pan, Reverb, Delay
- Master effect: 4 band EQ, CompressorSequencer
- Maximum events: 100,000 notes
- Resolution: 96 parts per 1/4-note
- Sequences: 99
- Tracks per sequence: 48
- MIDI output channels: 16
- Song mode: 20 songs, 250 steps per song
- Drum pad: 12 (velocity and pressure sensitive)
- Drum pad banks: 4
- Sync mode: MIDI clockInputs/Outputs
- Record input (L and R): 1/4-inch stereo phone x 2, pseudo balanced -40dBu, input impedance 9k ohm
- Max. Input level: +10dBu
- Stereo output (L and R): 1/4-inch phone x 2 pseudo balanced +11dBu, output impedance 1k Ohms,
- Max. Output level: +5 dBu
- Phones output: 1/4-inch stereo phone x 1, 200mW / 100 ohms
- MIDI inputs: 1 x 5-pin DIN
- MIDI outputs: 1 x 5-pin DIN
- USB: Slave connector x 1, USB MASS STORAGE CLASS support (Windows 2000/ME/XP or later version, or Mac OS 9.x/10.x or later version.)Data Compatibility
- MPC1000: SEQ, WAV, PGM
- MPC2000/2000XL: SEQ, WAV, SND, PGM (Most parameters of PGM file can be loaded.)
- MPC2500: SEQ, WAV, PGM
- MPC4000: SEQ, WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
- MPC3000: SND (THRU Computer)
- Z4/Z8: WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
- S5000/6000: WAV only (THRU Computer)
